About this glossary
This is a plain-language glossary of Bitcoin mining terms. Each entry gives a short definition, then points to a fuller guide if you want more. Terms are grouped by their first letter.
Jump to: A B C D E F G H I K L M N P S T W
A
Address
A Bitcoin address is an identifier that represents a possible destination for a bitcoin payment. It is derived from a public key and can be shared so you can receive mining payouts, for example from a pool or a cloud contract.
Read more: how mining payouts reach your wallet
ASIC
An ASIC is an application-specific integrated circuit built for a single job. In Bitcoin mining, ASICs are machines designed only to perform SHA-256 hashing at high speed, and they replaced general-purpose CPUs and GPUs as difficulty and hashrate grew.
Read more: hashrate explained
ASIC hashrate
ASIC hashrate is the speed a purpose-built mining chip works at, counted in hashes per second. An ASIC does one job, running the SHA-256 guesses that Bitcoin mining needs, so its hashrate is often stated in TH/s, trillions of hashes per second.
Read more: What hashrate means
B
Best difficulty
Best difficulty is the hardest single hash your miner has ever found, written as a difficulty figure. Hobby solo-mining guides call it a record, not progress: every hash is an independent draw, so a high best difficulty does not make the next block any more likely. It is not the network difficulty.
Read more: How mining pools work
Bitcoin (BTC)
Bitcoin is the cryptocurrency whose mining this site covers. It is recorded in units down to one satoshi, which is one hundred millionth of a bitcoin.
Read more: common questions
Bitcoin halving
Bitcoin halving is the scheduled cut, by half, of the new bitcoin subsidy paid for a valid block. It happens at a set interval measured in blocks rather than on a calendar date. Transaction fees are separate from the subsidy and are not halved by this rule.
Read more: Bitcoin halving and mining
Bitcoin halving schedule
The halving schedule is the block-based timetable for those cuts: the subsidy drops by half every 210,000 blocks, which is estimated at roughly every four years. It is counted in blocks, not dates, so the real-world timing shifts with how fast blocks are found.
Read more: Bitcoin halving and mining
Bitcoin mining facility
A bitcoin mining facility is a building or site set up to run many mining machines at once, with the electricity supply and cooling they need. The term usually points to a larger operation rather than a single machine at home.
Read more: Bitcoin mining facility
Bitcoin mining machine
A bitcoin mining machine is the hardware that runs the hash calculations used to mine, almost always a purpose-built ASIC today. People sometimes call the same box a mining rig. Setup and buying choices sit outside this entry.
Read more: Mining at home
Block
A block is a batch of Bitcoin transactions recorded permanently in order on the blockchain. It contains a time, the transactions, a reference to the previous block, and the answer to a hard proof-of-work puzzle. The first transaction pays the block reward.
Read more: blocks and the halving
Block height
Block height is a count of how many blocks are in the main chain up to and including a given block. It is used when scheduling halvings, which happen at fixed block numbers.
Read more: how halvings are scheduled
Block reward
The block reward is the total Bitcoin a miner can receive for mining a block: the subsidy plus any transaction fees from the transactions in that block.
Read more: block rewards and the halving
Block subsidy
The block subsidy is the fixed part of the block reward, created by the protocol. As of 18 November 2026 it is 3.125 BTC per block, following the April 2024 halving, and it halves every 210,000 blocks.
Read more: how the subsidy halves
Blockchain
The blockchain is a transaction database shared by all nodes. Each block holds a hash of the previous block, so the blocks form a chain, which means changing old data would require redoing vast amounts of proof of work.
Read more: glossary
C
Cloud mining
Cloud mining is a service that sells contracts entitling customers to a share of cryptocurrency mined by the service. You rent hashrate rather than owning hardware.
Read more: what cloud mining is
Cold storage
Cold storage means storing bitcoins offline so the private keys controlling them are never online, which can reduce the risk of theft by hackers and malware. Hardware wallets are one common form.
Read more: storing mining payouts
Confirmation
After a transaction is broadcast it may be included in a block, at which point it has one confirmation, and each later block adds one more. Mining payouts usually need at least one confirmation before they show as final.
Read more: payouts and confirmations
Contract term
In cloud mining, the contract term is the length of time the service agrees to point an amount of hashrate at a pool and pay you the output. Longer terms mean longer exposure to changes in difficulty and price.
Read more: cloud mining costs
D
Difficulty adjustment
Difficulty adjustment is how Bitcoin keeps blocks arriving about every ten minutes. Every 2,016 blocks the network compares how long those blocks actually took against the two-week target and resets the difficulty to match. A single change cannot move it by more than a factor of four either way.
Read more: Difficulty adjustment
E
Effective hashrate
Effective hashrate is a pool's estimate of your useful mining power, worked out from the valid shares it actually accepts. It usually sits a little below the nominal rate on the box, since connection drops, stale shares and plain luck all feed into the figure.
Read more: Effective hashrate
EH/s
EH/s means exahashes per second, a unit for very large hashrates. One EH/s is a quintillion (10 to the 18th) hashes per second, equal to 1,000 PH/s or a million TH/s. It is the usual scale for the whole network: about 984.5 EH/s on mempool.space, 18 Nov 2026.
Read more: What hashrate means
F
Fee (transaction fee)
A transaction fee is the difference between the amount spent and the amount received in a Bitcoin transaction. The spender usually pays the fee, and the miner who includes the transaction in a block may collect it on top of the subsidy.
Read more: how pools pay out
FPPS
FPPS, or Full Pay Per Share, is a mining pool payout method. It calculates a standard transaction fee level over a period, adds it to the block subsidy, and pays miners a flat amount for each valid share they submit.
Read more: pool payout methods
G
Good hashrate
A good hashrate is whatever rate makes sense for one miner's setup and goals; there is no single right number for everyone. Equipment efficiency, electricity costs, network difficulty and the share of rewards on offer all change what a given hashrate can actually do.
Read more: What hashrate means
H
Hash
A hash algorithm turns data of any size into a fixed-length value. The same input always gives the same hash, while changing one bit changes the hash completely. Bitcoin mining uses the SHA-256 hash function to test different block headers.
Read more: hashrate explained
Hashprice
Hashprice is a shorthand for the income per unit of hashrate per day. It moves with the Bitcoin price, the network hashrate, and the block reward, so it is a snapshot rather than a fixed rate.
Read more: estimate mining income
Hashrate
Hashrate is the number of hash calculations a miner performs each second, each one an attempt to find a valid block. A higher hashrate means more computational work going in, but it does not guarantee any particular payout or profit.
Read more: What hashrate means
Hashrate efficiency
Hashrate efficiency compares the hashing work a machine does against the electricity it uses, often written as joules per terahash or watts per unit of hashrate. A lower energy figure for the same work means a more efficient machine. Bitmain, for example, lists the S21 at 17.5 joules per terahash.
Read more: Cloud mining costs
Hashrate to satoshi
Hashrate to satoshi is the idea of turning a hashrate into an estimated number of satoshis earned. There is no fixed conversion: any figure depends on assumptions about network difficulty, how long you mine, the subsidy, fees and luck, so treat it as an estimate only.
Read more: Mining calculator
Hosting
Hosting means arranging for someone else to supply the electricity and environment for ASIC miners instead of running them at home. You pay for that service, so hosting changes your power cost.
Read more: cloud mining costs
Hot wallet
A hot wallet is a Bitcoin wallet whose private keys are stored on an internet-connected device. It is convenient for spending or receiving frequent mining payouts, but it can be more exposed to online attacks than cold storage.
Read more: hot and cold wallets
I
Immersion cooling
Immersion cooling runs mining hardware inside a non-conductive liquid that carries heat away, instead of relying on fans and moving air. The machines sit in the fluid, which absorbs their heat and passes it to a separate loop. It is mostly used in larger setups.
Read more: Immersion cooling
K
Kilowatt-hour (kWh)
A kilowatt-hour is a unit of energy equal to using one kilowatt of power for one hour. The U.S. Energy Information Administration glossary gives one kilowatt-hour as 3,412 Btu. It is the unit used to measure and bill a miner's power use.
Read more: cloud mining costs
L
Local hashrate
Local hashrate is the rate a miner reports from its own chips, shown right on the device. Because it comes straight from the hardware, it reads smoothly. It can differ from the pool's effective figure, which is built from accepted shares and tends to be noisier.
Read more: What hashrate means
M
Mempool
A mempool is a node's collection of valid, unconfirmed transactions that it may later include in a block or relay. There is no single global mempool, since each node or mining pool keeps its own.
Read more: glossary
Miner
A miner is either a person or business that engages in mining, or the hardware doing the hashing. Modern Bitcoin miners are almost entirely ASIC-based, because difficulty and total network hashrate have grown so much.
Read more: hashrate explained
Mining
Mining is the process of collecting transactions into blocks and performing proof of work to add them to the blockchain. A miner works to find a block hash below a target, and if successful receives the block reward.
Read more: mining economics and costs
Mining difficulty
Mining difficulty measures how hard it is to find a hash below the network's target. The lower the target, the harder the work and the higher the difficulty. It stood at about 134.8 trillion on mempool.space, 18 Nov 2026.
Read more: Mining difficulty
Mining pool
A mining pool is a group of miners that combine their computing power to search for blocks and share out the rewards by the pool's own rules. Pooling tends to make payments more frequent than solo mining, though the amount still depends on the pool's method, fees and results.
Read more: How mining pools work
Mining rig
Mining rig is a casual name for a single computer system set up to do the computations for mining. The Bitcoin Wiki describes it as a colloquial metaphor for one such machine. For Bitcoin, that usually means an ASIC machine.
Read more: Mining at home
Mining shares
Mining shares are proofs of work a pool asks for, each one a valid hash of lesser difficulty than a full block. Pools use them to measure how much work each member contributes. In solo mining, shares only show the miner is working and pay nothing by themselves.
Read more: How mining pools work
N
Network difficulty
Network difficulty is the single global difficulty every miner has to beat: a valid block needs a hash below the shared target. It resets every 2,016 blocks so blocks keep arriving at a steady pace, and it can move up or down.
Read more: Network difficulty
Network hashrate
Network hashrate is the total hashing power of every miner on Bitcoin combined. It cannot be read directly, so it is estimated from the time between blocks over a period. It was about 984.5 EH/s on mempool.space, 18 Nov 2026.
Read more: Network hashrate
Node
A node is any computer that connects to the Bitcoin network. A full node fully verifies all rules and maintains a complete copy of the blockchain, which pools and explorers rely on to see transactions and block history.
Read more: glossary
Nonce
A nonce in Bitcoin mining is a number in the block header that miners change repeatedly to search for a valid hash. Because finding a hash below the target is probabilistic, miners cycle through nonce values and perform huge numbers of SHA-256 hashes each second.
Read more: hashrate explained
P
Payment distribution method
A payment distribution method is the rule a pool uses to decide how block rewards are split among its members. Different pools use different methods, which affect how steady and how large each payment is. The method sits alongside the pool's fee, not in place of it.
Read more: How mining pools work
Payout threshold
A payout threshold is the minimum amount a pool or cloud mining service will send to your wallet in a single payment. It affects how often you see incoming transactions, and it varies by service.
Read more: mining payouts and wallets
PH/s
PH/s means petahashes per second, a step up from terahashes. One PH/s equals 1,000 TH/s, or a quadrillion (10 to the 15th) hashes per second. It sits between the TH/s used for single machines and the EH/s used for the whole network.
Read more: What hashrate means
Pool fee
A pool fee is the charge a mining pool keeps for running the service, set out in its own rules and usually taken as a share of rewards. It is separate from other costs like electricity or hardware.
Read more: How mining pools work
PPLNS
PPLNS, or Pay Per Last N Shares, is a mining pool payout method. It looks at the last N shares submitted to the pool, regardless of where rounds start and end, and pays block rewards out over that window.
Read more: pool payout methods
PPS
PPS, or Pay Per Share, is a mining pool payout method. It pays miners an instant flat amount for each valid share from the pool's own balance, without waiting for a block to be found, which reduces variance for miners but shifts risk to the pool.
Read more: pool payout methods
Private key
A private key is a secret number that allows bitcoins to be spent. Every wallet contains one or more private keys, and losing a private key usually means losing control of the bitcoins, so miners must protect the keys tied to their payout addresses.
Read more: keys and wallets
Proof of work
Proof of work is data that is hard to produce but easy for others to verify. Bitcoin uses a Hashcash-style proof of work with SHA-256, and adjusts difficulty so that blocks are mined about every ten minutes across the network.
Read more: hashrate explained
S
Satoshi (sat)
A satoshi is the smallest unit recorded on the Bitcoin blockchain. One satoshi equals one hundred millionth of a bitcoin. Mining payouts from pools and cloud contracts are often displayed in sats rather than whole bitcoins.
Read more: mining payouts and wallets
SHA-256
SHA-256 is the specific hash function used for Bitcoin proof of work. It takes an input and outputs a 256-bit hash. ASIC miners are designed to perform SHA-256 hashing extremely quickly, which is why they report their speed in hashes per second.
Read more: hashrate explained
Solo mining pool
A solo mining pool gives a miner the infrastructure to mine on their own rather than share rewards across the group. If that miner finds a valid block, they generally keep the reward under the service's rules and fees. Finding a block this way can be very unpredictable.
Read more: How mining pools work
Stale share
A stale share is a share the pool does not count toward payouts because it is linked to work on an old block. It still reflects hashing work but earns no reward, and high stale rates reduce your effective hashrate.
Read more: pools and shares
T
Target
The target is the threshold value a block hash must be below for the block to be valid. Mining is the process of finding a SHA-256 hash of the block header lower than or equal to this target, and difficulty is derived from the target.
Read more: mining difficulty
TH/s
TH/s means terahashes per second, the usual unit for a single mining machine. One TH/s is one trillion (10 to the 12th) hashes per second. A thousand TH/s make a PH/s, and a million make an EH/s, so TH/s is the building block of the larger units.
Read more: Terahashes per second
W
Wallet
A Bitcoin wallet is a collection of private keys, but it may also refer to the client software used to manage those keys and make transactions. Wallets can be hot or cold, and they receive mining payouts.
Read more: mining payouts and wallets
Related guides
Sources
- Bitcoin Wiki, Mining (accessed 2026-11-18)
- Bitcoin Wiki, Difficulty (accessed 2026-11-18)
- Bitcoin Wiki, Hash per second (accessed 2026-11-18)
- Bitcoin Wiki, Pooled mining (accessed 2026-11-18)
- Braiins Academy, Hashrate Specification (accessed 2026-11-18)
- BIPM, SI prefixes (accessed 2026-11-18)
- mempool.space mining API (accessed 2026-11-18)
- Hash, Bitcoin Wiki (accessed 2026-11-18)
- Controlled supply, Bitcoin Wiki (accessed 2026-11-18)
- Wallet, Bitcoin Wiki (accessed 2026-11-18)
- Address, Bitcoin Wiki (accessed 2026-11-18)
- Private key, Bitcoin Wiki (accessed 2026-11-18)
- Cold storage, Bitcoin Wiki (accessed 2026-11-18)
- Confirmation, Bitcoin Wiki (accessed 2026-11-18)
- Block, Bitcoin Wiki (accessed 2026-11-18)
- Blockchain, Bitcoin Wiki (accessed 2026-11-18)
- Mempool, Bitcoin Wiki (accessed 2026-11-18)
- Full node, Bitcoin Wiki (accessed 2026-11-18)
- Proof of work, Bitcoin Wiki (accessed 2026-11-18)
- Satoshi (unit), Bitcoin Wiki (accessed 2026-11-18)
- Transaction fees, Bitcoin Wiki (accessed 2026-11-18)
- Kilowatthour, EIA glossary (accessed 2026-11-18)