The short answer
TH/s stands for terahashes per second, a unit that measures Bitcoin mining speed. One TH/s means a machine makes a trillion hash attempts every second while it searches for a valid block. The "tera" prefix is SI shorthand for 10^12, so the figure counts guesses, not coins earned.
What a terahash counts
A hash here is one double SHA-256 computation, the math a miner repeats over and over looking for a result below the current target. Hashrate is how fast those attempts happen, and it's the primary measure of a miner's performance. When you see a 1 TH/s hashrate, that's a trillion attempts per second. The number tells you nothing about electricity use or reward on its own. It just measures raw speed, which is why TH/s sits next to power draw on most spec sheets. For the bigger picture of what the measure means and how it's estimated, see hashrate explained.
From TH/s to PH/s and EH/s
The prefixes climb by factors of a thousand, following the SI table. One petahash per second (PH/s) is 1,000 TH/s. One exahash per second (EH/s) is 1,000 PH/s, which works out to 1,000,000 TH/s. So the TH to PH hashrate step is simply dividing by a thousand: 4,500 TH/s is 4.5 PH/s. Going the other way, you multiply. These are the same units at different scales, picked so the numbers stay readable. A single machine is easiest to describe in TH/s, a large site in PH/s, and the whole network in EH/s.
A real machine: the Antminer S21
To put TH/s on something physical, take Bitmain's Antminer S21. Its listed specification is 200 TH/s drawing 3,500 watts at the wall, which are the maker's typical values. That's 200 trillion hash attempts a second from one box, at an efficiency of 17.5 joules per terahash. Put another way, 200 TH/s is 0.2 PH/s. A machine like this is the unit made concrete: when someone quotes a TH hashrate for home hardware, this is roughly the order of magnitude they mean.
Reading the whole network
The same unit scales up to every miner combined. On 18 Nov 2026, mempool.space put the Bitcoin network at about 984.5 EH/s. As an illustration, since one EH/s is 1,000,000 TH/s, that's about 984,500,000 TH/s of combined speed. Lined up against the S21's 200 TH/s, the gap shows why a single machine is a tiny slice of the total. This is also why network figures use EH/s: writing them in TH/s would run to nine digits.
Common mix-ups
TH/s measures speed, not earnings, and not efficiency. Two machines can both run at 200 TH/s and use very different amounts of power. Hashrate is also an estimate at the network level, worked out from the time between blocks rather than measured directly, so short-term readings wobble. And the "T" always means tera, 10^12, not a vague "trillions" that shifts with context. Keep the prefix straight and the conversions stay simple. For more terms, head back to the glossary.
Frequently asked questions
What does 1 TH/s mean?
One TH/s, or one terahash per second, means a miner makes a trillion hash attempts every second. "Tera" is the SI prefix for 10^12. It's a measure of speed, not of how many bitcoins the machine will earn.
How do I convert TH/s to PH/s and EH/s?
Divide by a thousand to go from TH/s to PH/s, and by a million to reach EH/s. So 1,000 TH/s is 1 PH/s, and 1,000,000 TH/s is 1 EH/s. The prefixes just step up by factors of a thousand.
How much is a single miner's hashrate?
It varies by model. As one concrete example, Bitmain lists the Antminer S21 at 200 TH/s drawing 3,500 watts, which are the manufacturer's typical values. That's 0.2 PH/s from one machine, a small fraction of the whole network.
Related guides
Sources
- BIPM, SI prefixes (accessed 2026-11-18)
- Bitcoin Wiki, Hash per second (accessed 2026-11-18)
- Bitmain Support, S21 Specification (accessed 2026-11-18)